Full‐scale transition from denitrification to partial denitrification–anammox (PdNA) in deep‐bed filters: Operational strategies for and benefits of PdNA implementation

Water Environment Research · 2022 · 27 citations

• Environmental engineering
• Chemistry
• Pulp and paper industry

-N/L was removed through the anammox pathway, which accounted for about 15% of the overall plant nitrogen removal. Anammox enrichment was confirmed by activity testing and molecular analysis. The large excess of AnAOB capacity present in the filters (5-10 times more than normal operation) resulted in stable and reliable operation through winter conditions and showed potential for further intensification. PRACTITIONER POINTS: For the first time, long-term mainstream anammox was established full-scale through PdNA implementation in deep-bed filters. PdNA implementation required upstream aeration control optimization to provide a blend of ammonium and nitrate to the filters. Efficient anammox enrichment and retention resulted in reliable PdNA performance under different seasonal and influent conditions. PdNA implementation resulted in significant methanol and alkalinity savings and upstream capacity enhancement as ammonia removal depended less on aerobic nitrification. In the event of NOB out-selection and presence of nitrite, carbon savings in PdNA polishing filters can be enhanced via partial nitritation-anammox.

Nitrogen removal capacity and carbon demand requirements of partial denitrification/anammox MBBR and IFAS processes

Water Environment Research · 2022 · 20 citations

• Chemistry
• Environmental engineering
• Environmental chemistry

A pilot study was conducted to investigate the carbon demand requirements and nitrogen removal capabilities of two mainstream partial denitrification/anammox (PdNA) processes: a two-zone, moving bed biofilm reactor (MBBR) process and an integrated fixed-film activated sludge (IFAS) process. The first MBBR zone conducted PdNA, while the second operated as an anammox zone. Operation of the IFAS process was conducted in two phases. The first phase of the operation involved minor external carbon addition, while the second phase of the operation involved controlled external carbon addition. The MBBR process produced an average effluent TIN concentration and chemical oxygen demand (COD)/TIN ratio of 2.81 ± 1.21 mg/L and 2.42 ± 0.77 g/g. The average effluent TIN concentrations and COD/TIN ratios for the IFAS process were 4.07 ± 1.66 mg/L and 1.08 ± 0.38 g/g during phase 1 and 3.30 ± 0.96 mg/L and 2.18 ± 0.99 g/g during phase 2. Despite having relatively low and unstable partial denitrification (PdN) efficiencies, both mainstream PdNA processes exhibited low effluent TIN concentrations and carbon requirements compared to nitrification/denitrification. Successful operation of the PdNA IFAS process indicates that mainstream PdNA can be implemented with minimal capital costs in a water resource recovery facility's second anoxic zone. PRACTITIONER POINTS: Low effluent TIN concentrations can be maintained in mainstream PdNA MBBR and IFAS processes with low external carbon demand. MBBR and IFAS PdNA processes do not require consistent or high PdN efficiencies to maintain low effluent TIN concentrations. IFAS and MBBR PdNA processes exhibit similar TIN and NH3 removal efficiencies. PdNA can be implemented in a second anoxic zone, using IFAS technology for anammox retention, with minimal capital costs.

Size dependent impacts of a model microplastic on nitrification induced by interaction with nitrifying bacteria

Journal of Hazardous Materials · 2021 · 42 citations

• Chemistry
• Biophysics
• Environmental chemistry

Interactions between substrate characteristics and microbial communities on biogas production yield and rate

Bioresource Technology · 2020 · 52 citations

• Environmental science
• Pulp and paper industry
• Biotechnology

Development of efficient electroactive biofilm in urine-fed microbial fuel cell cascades for bioelectricity generation

Journal of Environmental Management · 2020 · 58 citations

• Pulp and paper industry
• Biology
• Food science

The Microbial fuel cell (MFC) technology harnesses the potential of some naturally occurring bacteria for electricity generation. Digested sludge is commonly used as the inoculum to initiate the process. There are, however, health hazards and practical issues associated with the use of digested sludge depending on its origin as well as the location for system deployment. This work reports the development of an efficient electroactive bacterial community within ceramic-based MFCs fed with human urine in the absence of sludge inoculum. The results show the development of a uniform bacterial community with power output levels equal to or higher than those generated from MFCs inoculated with sludge. In this case, the power generation begins within 2 days of the experimental set-up, compared to about 5 days in some sludge-inoculated MFCs, thus significantly reducing the start-up time. The metagenomics analysis of the successfully formed electroactive biofilm (EAB) shows significant shifts between the microbial ecology of the feeding material (fresh urine) and the developed anodic biofilm. A total of 21 bacteria genera were detected in the urine feedstock whilst up to 35 different genera were recorded in the developed biofilm. Members of Pseudomonas (18%) and Anaerolineaceae (17%) dominate the bacterial community of the fresh urine feed while members of Burkholderiaceae (up to 50%) and Tissierella (up to 29%) dominate the anodic EAB. These results highlight a significant shift in the bacterial community of the feedstock towards a selection and adaptation required for the various electrochemical reactions essential for survival through power generation.

Critical Analysis of Biomass Retention Strategies in Mainstream and Sidestream ANAMMOX-Mediated Nitrogen Removal Systems

Environmental Science & Technology · 2020 · 123 citations

• Pulp and paper industry
• Chemistry
• Environmental chemistry

ANAMMOX (anaerobic ammonium oxidation) represents an energy-efficient process for biological nitrogen removal, particularly from wastewater streams with low chemical oxygen demand (COD) to nitrogen (C/N) ratios. Its widespread application, however, is still hampered by a lack of access to biomass-enriched with ANAMMOX bacteria (AMX), slow growth rates of AMX, and their sensitivity to inhibition. Although the coupling of ANAMMOX processes with partial nitrification is already widespread, especially for sidestream treatment, maintaining a functional population density of AMX remains a challenge in these systems. Therefore, strategies that maximize retention of AMX-rich biomass are essential to promote process stability. This paper reviews existing methods of biomass retention in ANAMMOX-mediated systems, focusing on (i) granulation; (ii) biofilm formation on carrier materials; (iii) gel entrapment; and (iv) membrane technology in mainstream and sidestream systems. In addition, the microbial ecology of different ANAMMOX-mediated systems is reviewed.